Cabinet Pulls
Wide-Range Stainless Steel T-Bar Cabinet Pull
Brassera BRS-BAR-STL-007 stainless steel T-bar cabinet pull with extended free ends and eight hole spacings in Brush Gold, Matt Black, and Chrome.
Specifications
- Model
- BRS-BAR-STL-007
- Material
- Stainless steel
- Type
- T-bar cabinet pull
- Design style
- Contemporary
- Bar diameter
- 12 mm
- Height
- 32 mm
- Hole spacings
- 64 / 96 / 128 / 160 / 192 / 224 / 256 / 288 mm
- Overall length
- 152 mm at 96 mm spacing; other spacings made to order
- Finish options
- Brush Gold, Matt Black, Chrome
- Supplied hardware
- Four mounting screws per handle
- Mounting
- Two-point fixing
- Application
- Kitchen, bathroom, living room, bedroom, dining room, kids' room; cabinets, drawers, dressers, wardrobes, cupboards
- Feature
- Eco-friendly, easy installation, resists rust
- OEM
- OEM accepted
- Package size
- 17 × 14 × 12 cm
- Gross weight
- 0.04 kg
- Minimum order
- 50 pieces
- Brand
- Brassera
A contemporary stainless steel T-bar cabinet pull with long free ends past two slim straight stems. Eight hole spacings run from 64 to 288 mm, with Brush Gold, Matt Black, and Chrome finishes; each handle includes four mounting screws.
Long Free Ends Beyond Slim Straight Stems
Model BRS-BAR-STL-007 is a contemporary T-bar pull for cabinet fronts. A full-length 12 mm round bar spans two slim straight stems, holding the bar 32 mm proud of the panel, with both ends running past fixing points as long free ends. Each end closes in a ground-flat circular face for crisp planar definition. Spare tube beyond both stems widens the holding zone, letting hands catch on from several angles. Knuckles clear drawer rims comfortably on deep banks, and extra bar stock past each stem gives a roomier hold than shorter pulls drilled the same way. Installers appreciate the roomy underside too, since knuckles no longer scrape drawer fronts on the pull stroke.
Eight Drilling Distances Between 64 mm and 288 mm
Eight standard hole spacings define this collection: 64, 96, 128, 160, 192, 224, 256, 288 mm. The dimension card pairs the 96 mm spacing with a 152 mm overall length. The stepped range runs from slim drawers up to broad dressers without a change in profile. Cabinetmakers keep one silhouette across mixed casework, narrow cupboards through wide wardrobes. Entry spacing suits jewellery chests; middle spans fit kitchen and vanity fronts; top range runs across long wardrobe leaves. Custom spacing requests remain supported for non-standard millwork, and mixed schedules can reference all eight steps inside one catalogue line.
Stainless Steel in Brush Gold, Matt Black, Chrome
Eco-friendly stainless steel forms bar and stems, keeping its appearance clean through daily contact. Three photographed finishes cover the range: Brush Gold, Matt Black, Chrome. Brush Gold carries warm brushed grain that sits well with walnut, oak, painted joinery. Matt Black reads deep and low-sheen against pale doors; Chrome brings bright mirror-like reflection to modern interiors. Every finish runs across bar, stems, and both terminal faces in one tone, so a single accent carries along a full run. Contract purchasers therefore keep a single shade through a whole property, from bulk orders down to single-piece top-ups.
Four Supplied Screws per Handle and Routine Upkeep
Installation takes two pre-drilled holes, each handle arriving with four mounting screws in its pack. Stainless steel resists rust where steam and splashes are part of daily life, including kitchens and bathrooms. Routine care calls for a soft damp cloth and a quick dry; keep abrasive pads, harsh solvents, bleach away. Wiping moisture and fingerprints promptly helps surfaces stay even. Bathroom fronts sit inside the declared usage list for this collection, and the supplied screws handle fitting without a trip to the hardware store.
Contemporary Fitment Across the Home
This contemporary profile suits kitchen and dining room casework, bathroom vanities, living room sideboards, bedroom wardrobes, kids' room cupboards alike. Mounted horizontally, the pull works across drawers and cupboard doors; mounted vertically, the same bar runs down tall wardrobe fronts. A chosen finish can carry through an entire home, small chests to long pantry runs. Symmetric end treatment reads the same in either orientation, so interior teams keep one accent from front hall through back rooms. Renovation schedules benefit too, because the stems suit common drilling patterns found on older joinery.
Protective Export Packing, a Five-Day First Tier, and OEM Support
Each handle packs in a poly bag inside an inner box, with outer cartons measuring 17 by 14 by 12 cm at 0.04 kg per unit. Dispatch splits into three volume tiers — orders of 1–300 pieces ship in 5 days, batches of 301–1000 take 12 days, runs of 1001–3000 finish in 18 days. Brassera accepts OEM briefs covering custom finishes and spacings for trade buyers. Manufacturing happens in Guangdong, China.
Products are manufactured in Guangdong, China. The selling unit is one piece.
