Cabinet Pulls
Wavy Brass Cabinet Pull and Knob Family in Brass Gold
Brassera BRS-BAR-BRS-007 wavy brass cabinet pull and knob family in Brass Gold for wardrobes, cupboards, and kitchen drawers across residential storage.
Specifications
- Model
- BRS-BAR-BRS-007
- Material
- Brass
- Type
- Wavy bar pull with T-knob and round knob
- Design style
- Modern
- Finish
- Brass Gold
- Bar pull
- 34 mm high; 8 mm shaft; 14 mm post base; 127 g at 148 mm
- Bar pull sizes
- 148 / 180 / 212 / 244 mm overall with 96 / 128 / 160 / 192 mm center-to-center; custom lengths available
- T-knob
- 55 mm long, 34 mm high, 14 mm base, 45 g
- Round knob
- 33 mm face diameter, 27 mm high, 16 mm base, 70 g
- Sizes
- Customized sizes available, confirmed at order
- Mounting
- Two-post for bar pulls, single-post for knobs
- Application
- Kitchen cabinets, drawers, wardrobes, cupboards, dressers, wine cabinets
- OEM
- OEM and ODM accepted, logo on product and packaging
- Package size
- 60 × 5 × 3 cm
- Gross weight
- 2.5 kg
- Minimum order
- 50 pieces
- Brand
- Brassera
An ornamental brass hardware family combining an undulating bar pull, a matching T-knob, and a recessed disc knob in a unified Brass Gold finish. Designed for kitchen casework, wardrobes, and bedroom dressers.
Sinuous Wave Geometry Featuring Ball-Tipped Ends over Hourglass Feet
Brassera model BRS-BAR-BRS-007 introduces an ornamental brass series shaped around a flowing, undulating baluster silhouette. Each long bar pull carries a sinuous wave profile defined by two outer bell swells, a concave central waist, and a rounded mid-span swell. Symmetrical ball-tipped ends complete both horizontal extremities, while two hourglass feet elevate the grip above cabinet face panels. Matching T-knobs reproduce this sinuous geometry in a compact format mounted over a single stepped pedestal base. The round disc knob presents nested recessed rings encircling a small raised button centre. Fingers wrap these sculpted contours comfortably, securing tactile control during drawer operation.
Three Coordinated Profiles Defined by Official Card Dimensions
Three coordinated silhouettes share proportional harmony based on official dimension card data. Long bar pulls span 148 mm with 96 mm fixing centres, rising 34 mm at 127 g. Compact T-shaped knobs condense that undulating bar into 55 mm spans on stepped posts, matching 34 mm height at 45 g. Round disc knobs carry the ring-recessed face design across a 33 mm diameter, rising 27 mm at 70 g. Specifying these profiles keeps visual alignment across cabinet doors, tall verticals, and drawer fronts. Customized sizes remain available for non-standard cabinet runs.
Warm Brass Gold Luster Across Every Family Element
Eco-friendly brass forms each piece within this program, giving every profile the same warm metallic character. Bar pulls, T-knobs, and circular discs carry a uniform Brass Gold finish, creating visual continuity across casework elevations. This tone reflects ambient illumination softly without harsh glare, enriching painted joinery or wood veneers. A single curated finish preserves harmony when pairing horizontal pulls with adjacent knobs on cabinet faces. Smooth surfaces extend across wave contours, ball-tipped terminals, hourglass bases, and recessed face rings without tonal variation. Specifiers gain cohesive hardware language because every component shares identical brass composition.
Panel Mounting Procedures and Surface Care Guidelines
Installation stays straightforward, with every hourglass base seating directly against cabinet surfaces. With the bases seated flush, the exposed face stays clean and uninterrupted. Because brass naturally resists rust within moisture-prone interior zones, routine maintenance remains straightforward. Upkeep takes only a soft cloth dampened with warm water. Preserving golden sheen demands avoiding abrasive scouring pads, aggressive solvents, or bleach solutions.
Residential Interior Placement from Kitchen Joinery to Wardrobes
Distinctive profile styling adapts across residential storage environments, elevating casework throughout fine interior architecture. Install undulating bar pulls horizontally along kitchen drawers or vertically across tall pantry cupboard doors for rhythmic continuity. Coordinating T-shaped knobs serve compact cupboard drawers, while round disc knobs provide intuitive grip points on upper doors and credenzas. In bedrooms, pairing bar pulls on wardrobe doors with circular knobs across matching dressers creates unified cadence. Living areas benefit from mounting these fixtures to bookcases and wine cabinets. Multi-room deployment keeps one consistent look across every drawer, cupboard, and wardrobe.
Unit Carton Dimensions, Tiered Turnaround Periods, and OEM Branding
Export packaging secures boxed hardware inside cartons measuring 60 by 5 by 3 cm with a gross weight of 2.5 kg. Production runs follow defined turnaround tiers: orders of 1 to 300 units dispatch in 7 days, batches of 301 to 1000 units dispatch in 12 days, while project volumes of 1001 to 3000 units ship within 18 days. Production originates in Guangdong, China, supported by OEM and ODM capabilities. Tailored services include custom client logos on hardware bodies or exterior carton packaging. Submit your complete millwork schedule directly to Brassera representatives to initiate quotes and confirm production windows.
Products are manufactured in Guangdong, China. The selling unit is one piece.
