Cabinet Pulls
Trapezoidal Matte Black Stainless Steel Cabinet Pull
Brassera model BRS-BAR-STL-003 is a stainless steel trapezoidal cabinet pull in Matte Black, sized for wardrobe doors and courtyard joinery.
Specifications
- Model
- BRS-BAR-STL-003
- Material
- Stainless steel
- Shape
- Trapezoidal section with chamfered long edges
- Design style
- Minimalist
- Finish
- Matt Black
- Center-to-center spacing
- 96 mm, 128 mm, 160 mm, or customized
- Overall length
- 170 mm (128 mm spacing variant)
- Height
- 36 mm (1.42 inches)
- Bar thickness
- 12 mm
- Mounting foot
- 13 × 13 mm
- Unit weight
- Approximately 46 g (128 mm spacing variant)
- Usage
- Wardrobe doors
- Application
- Wardrobe, courtyard joinery
- Feature
- Easy installation
- Minimum order
- 50 pieces
- Package size
- 20 × 16 × 13 cm
- Gross weight
- 0.43 kg
- Brand
- Brassera
A Trapezoidal Section with Chamfered Long Edges
Brassera model BRS-BAR-STL-003 is a stainless steel cabinet pull with a trapezoidal cross-section. Its flat top face is narrower than the base, and both long chamfers run outward as they descend. Seen end on, the profile reads as a clean trapezoid. The chamfered sides sit on both long faces of the pull.
Minimalist styling leaves this profile unadorned. The chamfers catch light along their length and give fingers room to settle. Section width holds end to end, so grip feel stays unchanged. Nothing in the profile is ornamental; every surface has a job.
Three Spacings plus Custom Lengths
Three centre-to-centre spacings are offered: 96 mm, 128 mm, and 160 mm. Other lengths are made to order, keeping mixed wardrobe widths within one profile family. The stocked ladder therefore covers both narrow and wide leaves from a single design. Custom lengths follow the same section, so a longer run keeps the same look. A 96 mm pull suits a narrow cupboard door; 160 mm suits a wide leaf.
The dimensioned drawing documents the 128 mm variant. Overall length measures 170 mm, height 36 mm (1.42 inches), bar thickness 12 mm, mounting foot 13 by 13 mm, and printed unit weight approximately 46 grams.
Matte Black from Bar to Feet
Matt Black is the only finish offered here. One tone covers the full length and both feet, so wardrobe runs read as a single colour across every door. Single-finish ordering also simplifies reordering, with no second colour to match. One colour also means a mixed order needs no colour-matching check.
The coating is low-sheen black, not polished. It stays quiet against pale timber and painted joinery, receding against dark casework. Black hardware suits both dark and light interiors.
Stainless Steel with Easy Installation
Body plus feet are stainless steel. Easy installation is the feature named for this pull, and every visible face carries the Matt Black coating. Two bores are enough to fit each pull.
Open Ends and Splayed Feet
Each foot ends in a flat 13 by 13 mm pad resting against the cabinet face. At either end the straight run turns down, posts splaying slightly outward toward base pads. The pads are the only contact points between pull and panel.
Both end faces are open, with the closed trapezoidal perimeter visible and no cap fitted. The end-face close-up shows that opening.
Wardrobe and Courtyard Applications
This pull suits wardrobes and courtyard joinery, both of which favour a profile that keeps its lines plain. Courtyard cabinets take the same fixing layout as indoor wardrobes.
Each pull ships as a single item in a carton measuring 20 by 16 by 13 cm, gross weight 0.43 kg, with mail-order packing. Minimum order: 50 pieces, processed in quantity bands of 7, 10, and 14 days. Carton dimensions are compact enough for parcel shipping.
