Cabinet Knobs
Textured Round Aluminum Cabinet Knob
Brassera BRS-KNB-ALU-002 textured round aluminum cabinet knob in Matt Black, Brush Gold, and Champagne Gold for kitchen, bathroom, and wardrobe cabinetry.
Specifications
- Model
- BRS-KNB-ALU-002
- Material
- Aluminum alloy
- Type
- Textured round cabinet knob
- Design style
- Modern
- Diameter
- 30 mm
- Height
- 30 mm
- Finish options
- Matt Black, Brush Gold, Champagne Gold
- Supplied hardware
- Mounting screw included
- Mounting
- Single-point fixing
- Sizes
- Customized sizes available, confirmed at order
- Application
- Kitchen cabinets, drawers, wardrobes, cupboards, dressers
- Packing
- Poly bag, inner box, outer carton
- OEM
- OEM accepted
- Package size
- 18 × 16 × 14 cm
- Gross weight
- 0.06 kg
- Minimum order
- 50 pieces
- Brand
- Brassera
A round aluminum cabinet knob with fine vertical linework around the drum-shaped body and a linear brushed top face. Offered in Matt Black, Brush Gold, and Champagne Gold, each unit includes a mounting screw.
Drum-Shaped Body with Vertical Line Texture and a Brushed Face
Brassera model BRS-KNB-ALU-002 is a round cabinet knob built as a compact cylindrical drum. Fine upright lines run its sidewall's full height, forming dense linear relief around the body. A flat circular top carries a directional brushed finish that catches light across the surface. Underneath, a short narrow stem seats the knob cleanly over its mounting point. Fingers close comfortably around the drum for drawers, cupboards, and wardrobe fronts. The straight-sided profile also presents a plain circular face from any angle, which suits panels seen from both sides.
Balanced 30 mm Proportions Across Diameter and Height
Each knob measures 30 mm across the top, standing 30 mm high, giving equal proportions in profile. Its stem base sits narrower than the drum; the silhouette stays compact against cabinet fronts. A brushed top spanning the full diameter lets two finish treatments read clearly at a glance. Retrofits start by recording existing drillings, so a replacement set can match the old positions. Custom sizes can be produced for non-standard runs upon request, so unusual drawer widths or cabinet depths are covered too.
Aluminum Alloy Body in Three Photographed Finishes
An eco-conscious alloy forms the body, keeping each piece light to lift and position. Three photographed colours cover the range: Matt Black, Brush Gold, Champagne Gold. Matt Black reads crisp on pale painted cabinetry; both warm tones deepen timber and veneer. The brushed top and the line-worked wall share one continuous colour per option, reading as a single tone from every angle. Specifiers can run a single chosen colour across a whole scheme, from kitchen islands through bedroom wardrobes, keeping every storage face visually unified. The line-textured wall also masks everyday handling marks, which keeps high-traffic drawers looking tidy between cleans.
Single-Point Fastening with a Supplied Mounting Screw
Fitting takes one pre-drilled hole, every unit arriving with its mounting screw included. Stem sits flat on door surfaces; a single turn holds the knob firm. The alloy resists rust where steam or cooking humidity settles on hardware. Cleaning calls for a cloth wrung out in warm water; keep scouring pads, strong solvents, bleach away. Wiping fingerprints, water spots promptly preserves appearances through daily use. Supplied screws suit standard cabinet drillings, so replacement sets fit existing furniture without redrilling, each box carrying the correct screw count for its contents.
Fitment Across Kitchen, Bathroom, and Wardrobe Casework
The compact disc profile suits kitchen units, drawers, pantry cupboards, bathroom storage alike. In bedrooms, matching pieces run over wardrobes, chests, dressers for an even hardware line. Symmetry means every piece reads identically on hinged leaves, sliding fronts, keeping rows consistent wall to wall. Ordering one finish across a whole project keeps every room tied to the same accent. Renovation layouts follow identical steps, because the stem meets common drillings. Contractors can therefore quote one fitting routine for kitchens, bathrooms, and bedroom runs within the same build, and phased handovers line up with cabinet delivery dates.
Three-Layer Packing and Tiered Production Windows for OEM Runs
Every consignment leaves in three-layer packing: poly bag, inner box, master carton measuring 18 by 16 by 14 cm at 0.06 kg. Production runs in three volume tiers: 1 to 100 pieces dispatch in 7 days, 101 to 1000 in 15 days, 1001 to 3000 in 22 days. Brassera welcomes OEM briefs from trade customers, covering custom sizes. Manufacturing takes place in Guangdong, China.
Products are manufactured in Guangdong, China. The selling unit is one piece.
