Cabinet Pulls
Stainless Steel Plate Door Pull with U-Bar Grip
Brassera BRS-BAR-STL-005 stainless steel plate door pull pairs a slim plate with U-bar grip. Customized spacings for sliding doors and wardrobes.
Specifications
- Model
- BRS-BAR-STL-005
- Material
- Stainless steel
- Type
- Plate door pull with U-bar grip
- Design style
- Minimalist
- Shape
- Rounded U-bar grip on a flat rectangular mounting plate
- Colour
- Gold, Brushed Silver, Matt Black
- Center-to-center
- 96 mm, 128 mm, 160 mm
- Overall length
- 148 mm (128 mm C.C version); customized sizes on request
- Bar diameter
- 9 mm
- Grip clearance
- 25 mm
- Overall height
- 38 mm
- Plate thickness
- 2 mm
- Mounting
- Two-hole surface mount
- Usage
- Sliding doors, wardrobes, cupboards, cabinets, drawers
- Feature
- Easy installation
- Minimum order
- 50 pieces
- Lead time
- 7 days (1-100 pcs), 10 days (101-500 pcs), 14 days (501-1000 pcs)
- Package size
- 20 x 16 x 13 cm
- Gross weight
- 0.43 kg
- Selling unit
- Piece
- Place of origin
- Guangdong, China
- Brand
- Brassera
Brassera model BRS-BAR-STL-005 presents a stainless steel plate door pull built around minimalist U-bar geometry. One elongated flat plate carries the rounded grip bar across the face. Clean lines suit modern sliding door panels plus tall wardrobe fronts. Specifiers pick this profile for streamlined casework across contemporary interior millwork. The bar turns down at each side to meet the plate near its ends. Gold, silver, black: one colour covers the full assembly.
A U-Bar Grip on a Flat Plate
Each pull pairs the flat mounting plate with a rounded U-bar standing off the front face. Two screw holes sit near outer ends of the rectangular backplate. Open spacing between grip and plate gives fingers direct access. Plate edges stay crisp behind the bar; the round grip bar runs uniform end to end. Screw holes sit centred near each plate end.
Three Finishes: Gold, Brushed Silver and Matt Black
Finish choices for this plate pull: Gold, Brushed Silver, Matt Black. Gold shows a bright reflective sheen, enriching cabinetry with warm metallic highlights. Brushed Silver shows fine directional brushing along plate and bar, softening ambient reflections. Matt Black gives a non-reflective dark surface with bold graphic contrast over pale timber or white joinery. One finish carries the whole pull, backplate included. Surface brushing follows one direction across bar and plate alike.
9 mm Bar with a 25 mm Grip Clearance
A dimension drawing lists official figures: 9 mm bar diameter, 25 mm grip clearance, 38 mm overall height, 2 mm plate thickness. 25 mm of clearance behind the grip leaves open space for fingers. Total projection from panel face to outer grip crest reaches 38 mm. A slim 2 mm plate keeps base profile low against woodwork. Bar ends turn down squarely to meet the plate.
Spacings of 96, 128 and 160 mm
Standard options cover three hole spacings, measured center to center: 96 mm, 128 mm, 160 mm. The 128 mm spacing version measures 148 mm overall along its plate, as marked on that drawing. Overall lengths for 96 mm and 160 mm versions stay undeclared in factory documentation. The three hole-spacing options set plate footprint on slim door stiles or wide drawer fronts; the 128 mm version sits mid-range. Brassera also supplies customized hole spacings made to order for project drawings.
Mounting screws appear with the handle in the dimension drawing for panel fastening. Fitters install these pulls on sliding door fronts, tall wardrobes, kitchen cupboards, cabinets, storage drawers. Two fastener positions carry each pull on timber or composite faces. One plate profile repeats across runs of doors and drawers, holding a single look across mixed storage. Stacked drawer banks take a short spacing, tall door leaves take a longer spacing.
Slim Plates for Sliding Doors and Wardrobes
Minimalist styling defines this plate pull line. Slim plates sit quietly on sliding door panels, while the rounded bar adds vertical accent to wardrobe fronts with no added ornament. Clean geometric proportions let hardware follow casework lines in minimalist schemes. All three finishes read as flat, low-contrast surfaces against painted or timber fronts. Bar thickness stays visually light against wide panels.
Commercial procurement opens at 50 pieces per production batch. Manufacturing follows tiered scheduling tied to order volume. Orders of 1 to 100 pieces need 7 days for factory completion. Medium quantities between 101 and 500 pieces ship in 10 days. Larger consignments from 501 to 1000 pieces complete in 14 days.
Submit finish selection, hole spacing requirements, projected order quantity to Brassera, and request an official quotation on model BRS-BAR-STL-005.
Products are manufactured in Guangdong, China. The selling unit is one piece.
