Cabinet Pulls
Recessed Sliding Door Pull with Textured Slot
Brassera BRS-EDG-BRS-001 recessed sliding door pull features slim brass plates with textured slots, 150 mm hole spacing and 185 mm overall length.
Specifications
- Model
- BRS-EDG-BRS-001
- Material
- Brass
- Type
- Recessed sliding door pull
- Design style
- Traditional
- Shape
- Rectangular plate with an oval recessed finger slot
- Colour
- Matt Black, Bronze, Brass Gold, Aged Brass, Pearly Gray
- Length
- 185 mm edge to edge, 150 mm hole to hole (customized sizes on request)
- Width
- 43 mm
- Slot depth
- 10 mm
- Door thickness
- 25-58 mm, set by trimming the screws shown with the pull
- Usage
- Sliding doors, wardrobes, cupboards, cabinets, drawers
- Application
- Kitchen, bathroom, bedroom, living room, dining room
- Feature
- Eco-friendly, easy installation, resists rust, multi-purpose
- OEM
- Accepted
- Minimum order
- 5 pieces
- Lead time
- 10 days (1-100 pcs), 12 days (101-500 pcs), 15 days (501-2000 pcs)
- Packing
- Foam, inner box, outer carton
- Package size
- 35 x 28 x 20 cm
- Gross weight
- 1.5 kg
- Selling unit
- Piece
- Place of origin
- Guangdong, China
- Brand
- Brassera
Brassera model BRS-EDG-BRS-001 is a rectangular recessed sliding door pull made from brass with an elongated oval finger grip. This slim profile sinks into door leaves, creating flush lines along panel faces. Cabinetmakers choose this brass pull for pocket doors plus bypass sliding partitions across residential interiors. Oval openings give fingers direct purchase while exterior planes stay clean and flat.
A Rectangular Slot Set into the Door
Each brass plate mounts inside a routed slot along the door edge or panel face. Twin countersunk holes at opposite plate ends receive long through-screws that pass through the woodwork core. This inset mounting unites front and rear plates into one assembly across sliding leaves. Screw heads sit inside countersunk openings, so nothing stands proud of the plate.
An Oval Grip with a Textured Slot Floor
Each recessed plate features an elongated oval opening shaped for finger access during sliding motions. Pulling relies on an undercut lower lip, which gives fingers leverage when sliding panels. Inside each cavity, fine diamond-patterned texture covers brass floors and catches ambient light. That texturing adds subtle depth behind the oval opening while assisting grip. Raking light traces the pattern along the cavity floor.
Five Finishes from Aged Brass to Pearly Gray
Brassera produces this recessed pull in five finishes: Matt Black, Bronze, Brass Gold, Aged Brass, and Pearly Gray. Matt Black gives deep non-reflective coating for monochrome joinery. Bronze displays antique brown coloration accented by warm undertones. Brass Gold shows bright reflective warmth across plate faces. Aged Brass presents softened vintage golden tones, while Pearly Gray offers neutral pale gray for light woodwork. Each finish covers plate face and cavity alike.
Door Thickness from 25 to 58 mm
The plate measures 185 mm edge to edge, with 150 mm between the two fixing holes, and 43 mm across its width. Routed pockets need 10 mm slot depth inside timber panel stock to seat the recessed body. Compatible door thickness spans 25 to 58 mm across interior sliding assemblies. Thickness is set by trimming the through-screws shown with the pull to match panel depth before tightening.
Brass construction resists rust in interior environments near moisture-prone kitchen sinks or bathroom areas. Joiners install the pull by routing rectangular slots into door faces to accept the recessed body. Through-screws insert from rear plates and clamp both faces against timber cores. Screw length is trimmed to suit measured door thickness before final tightening. Flush positioning helps bypass panels clear adjacent partitions.
Slim Plates for Wardrobes and Sliding Doors
Hardware packages ship as coordinated pairs configured for both faces of sliding leaves. Interior fitters specify these recessed pulls for bedroom wardrobes, living room cupboards, dining room storage, kitchen cabinets, dresser drawers. Sinking hardware into routed pockets removes protruding handles and keeps clearance between passing leaves. Two-sided mounting gives matching brass appearance from either side of wardrobes. One plate profile serves door edges and face positions.
Commercial procurement begins with minimum orders of 5 pieces per batch. First-tier runs of up to 100 pieces take 10 days. Mid-size batches to 500 pieces run 12 days, and larger runs to 2000 pieces finish within 15 days. Brassera accepts OEM production contracts tailored to millwork specifications. Protective export packaging wraps each item in foam, seals it within two nested boxes for dispatch.
Submit project schedules to Brassera to request an official quotation for model BRS-EDG-BRS-001. Direct communication confirms required plate size, desired finish, and door thickness requirements. Delivery timelines follow with the quotation.
Products are manufactured in Guangdong, China. The selling unit is one piece.
