Cabinet Pulls
Polished Zinc Bar Pull and Flower-Cup Knob Family
Brassera BRS-BAR-ZNC-011 polished zinc bar pull and flower-cup knob family: three centre-to-centre options 96 to 192 mm, Brush Gold, Coffee, Dark Gray finishes.
Specifications
- Model
- BRS-BAR-ZNC-011
- Material
- Zinc alloy
- Type
- Bar pull and knob set
- Design style
- Modern
- Colour
- Brush Gold, Coffee, Dark Gray
- Overall length
- 137 mm, 168 mm, 232 mm (customized on request)
- Center-to-center
- 96 mm, 128 mm, 192 mm (customized on request)
- Bar height
- 30 mm
- Piece weight
- 91 g, 106 g, 135 g
- Knob size
- Dia 25 x H26 mm, 55 g
- Usage
- Cabinet doors, drawer fronts, dressers, wardrobes, cupboards
- Application
- Kitchen, bathroom, living room, bedroom, dining room, kids room, apartment
- Feature
- Eco-friendly, easy installation, resists rust, multi-purpose, customized sizes
- Minimum order
- 50 pieces
- Lead time
- 7 days (1-300 pcs), 12 days (301-1000 pcs), 18 days (1001-3000 pcs)
- Package size
- 20 x 18 x 18 cm
- Gross weight
- 0.15 kg
- OEM/ODM
- Accepted
- Logo
- On product and packaging
- Sample
- Can be provided
- Selling unit
- Piece
- Place of origin
- Guangdong, China
- Brand
- Brassera
Brassera model BRS-BAR-ZNC-011 is a polished zinc bar-pull and flower-cup knob set for drawer fronts, cupboards, wardrobe doors and dresser banks. Slim cylindrical bars pair with matching flower-cup knobs inside one series. Zinc alloy carries every component, bar through feet to knob base. Three SKU finishes set the palette. Specifiers use this hardware for residential casework, from drawer banks to full cupboard runs. One coordinated palette then covers a whole cabinetry package.
Striated End Caps over Conical Feet
A slim cylindrical bar spans each pull, its ends closed by short caps cut with fine striations. Striated caps add texture on both ends against the plain shaft. Two conical feet carry the bar, round at the top, widening where they meet panel frontage. The narrow cylinder holds one even diameter along its run, spanning drawer fronts, doors and wardrobe leaves. Each foot base rests flat against its panel, holding the bar clear of woodwork. Installers drill at marked spacing, then seat both feet. Seen end-on, each cap reads as a fine-toothed circle around the bar tip.
A Flower-Cup Knob with a Wavy Rim
Matching knobs follow a flower-cup form: rounded top, wavy rim edge, striated skirt below. Vertical striations run down that skirt to a compact round base. Each knob measures Dia 25 x H26 mm at 55 g, sized for drawers, narrow doors. The wavy rim edges the cup opening, while striations read as fine lines in raking light. Under the skirt, the small round base meets the panel. Any bar length here pairs with this same knob, so one order dresses doors plus drawers.
Three Lengths for Standard Drilling Layouts
Three stock lengths carry three spacing pairs: 137/96, 168/128, 232/192 mm as length over hole spacing. Bar height holds at 30 mm throughout. Piece weights run 91, 106 and 135 g as the bar grows. Other sizes stay customized, so longer or shorter fronts can be produced to order while keeping the same stock height. Check the hole spacing across drill points first; existing hole patterns decide which length fits. Compact spacings fit drawer banks, while extended bars span wide wardrobe doors.
Brush Gold, Coffee and Dark Gray
Every bar pull, foot and knob base carries one of three SKU finishes: Brush Gold, Coffee plus Dark Gray. Gold tones read warm, Coffee sits deep brown-toned, Dark Gray stays neutral against pale fronts. Under each finish, zinc alloy resists rust, supporting placement near damp interior zones. Colour ranges across bar, caps, feet, skirt, base, letting pull plus knob arrive as one matched pair. Residential rooms stay in scope: kitchens, bathrooms, bedrooms, living rooms, dining rooms, kids rooms, apartments.
Fifty-Piece Runs and Tiered Delivery
Trade terms open at 50 pieces per batch, an entry quantity. First runs of 1-300 pieces ship in 7 days; batches of 301-1000 pieces need 12 days; larger lots of 1001-3000 pieces take 18 days. One piece travels in a 20 x 18 x 18 cm carton at 0.15 kg gross. OEM plus ODM orders are accepted, with logos placed on product and packaging. Samples can be provided so buyers check striations, skirt and finish before committing. Production runs from Guangdong, China.
Ask Brassera for Pricing on Your Schedule
Request an official quotation for model BRS-BAR-ZNC-011 with your chosen finish, quantity and hole spacing. Include overall length, centre-to-centre measurement and required volume with each enquiry. Sales staff answer with commercial terms, packing details and shipment planning. Sample requests are handled alongside your quotation. Clear hole spacings let production schedule a run without follow-up emails.
Products are manufactured in Guangdong, China. The selling unit is one piece.
