Cabinet Pulls
Brass Bar Pull and Knob Family with Grooved Ball Ends
Brassera BRS-BAR-BRS-003 brass bar pull and banded round knob family in Brass Gold, with six centre-to-centre options from 96 to 320 mm for cabinet fronts.
Specifications
- Model
- BRS-BAR-BRS-003
- Material
- Brass
- Type
- Bar pull and round knob family
- Design style
- Modern
- Colour
- Brass Gold
- Overall length
- 152 mm, 184 mm, 216 mm, 248 mm, 280 mm, 380 mm (customized on request)
- Center-to-center
- 96 mm, 128 mm, 160 mm, 192 mm, 224 mm, 320 mm (customized on request)
- Bar width
- 12 mm
- Bar height
- 33.5 mm
- Knob size
- Dia 25 x H34 mm; Dia 28 x H37 mm
- Usage
- Cabinet doors, drawer fronts, dressers, wardrobes, cupboards
- Application
- Kitchen, bathroom, living room, bedroom, dining room, kids room, apartment
- Feature
- Eco-friendly, easy installation, customized sizes
- Minimum order
- 10 pieces
- Lead time
- 7 days (1-10 pcs), 12 days (11-50 pcs), 20 days (51-200 pcs)
- Package size
- 28 x 24 x 18 cm
- Gross weight
- 0.5 kg
- Selling unit
- Piece
- Place of origin
- Guangdong, China
- Brand
- Brassera
Brassera model BRS-BAR-BRS-003 is a brass bar-pull and knob family finished in Brass Gold. This series covers cylindrical bars with grooved ball ends plus matching banded round knobs. These cabinet pulls suit drawers, cupboards, wardrobes and dressers throughout residential interiors. Buyers specify this hardware for kitchens, bathrooms, living rooms, bedrooms, dining rooms, kids rooms and apartments. Material across every component is brass. Its modern design keeps clean lines suited to contemporary joinery.
Grooved Ball Ends on Bell-Shaped Bases
A plain cylindrical bar spans between two straight posts. Each end closes with a grooved ball, shaped by fine vertical grooves cut around its circumference. Both posts carry it clear of the panel, widening into bell-shaped bases that rest flat on the surface. Fingers close around the narrow shaft with open space behind it. Nothing interrupts the run from end to end.
A Bar Pull Matched with a Banded Round Knob
Matching knobs repeat this round form at reduced scale. Horizontal bands wrap each head from top to bottom, each one following its curve. Below it sits a short bell base that meets the panel as bar posts do. Two sizes are catalogued: Dia 25 x H34 mm and Dia 28 x H37 mm. Smaller heads suit compact drawers and cabinet doors, while larger versions fit bigger fronts. Both diameters carry one band pattern. Single orders can then dress doors and drawers together.
Six Overall Lengths and Their Centre-to-Centre Pairs
Six overall lengths pair with six centre-to-centre spacings. L 152 mm matches C.C 96 mm; L 184 mm matches 128 mm; L 216 mm matches 160 mm; L 248 mm matches 192 mm; L 280 mm matches 224 mm; L 380 mm matches 320 mm. Bar width across every length measures 12 mm, while bar height reaches 33.5 mm. Spacing decides fit, not overall length, and short spacings suit drawers while long spans cover wide wardrobe fronts. Size selection is customized on these pulls, so other sizes can be made to order for non-standard fronts. Measure centre-to-centre between drill points before drilling, because drilled holes fix which length fits. Every pairing appears in the chart below.
Brass Gold on Both Bars and Knobs
Bars and knobs ship in one SKU finish: Brass Gold. Tone stays consistent across both product types, so a project shows one colour on every pulled front. Uniform colour holds along long runs of cupboard fronts, wardrobe doors or drawer banks, including runs where compact drawer heads sit beside long wardrobe bars. Finish coverage extends over bar surfaces, ball ends, posts, bases and knob bands. Either knob size pairs with any bar length, since one finish carries across the range.
Trade Terms: Ten Pieces, Seven Days
Trade terms open at a minimum order of 10 pieces. Batches of 1 to 10 pieces need 7 days. Orders spanning 11 to 50 pieces take 12 days, while 51 to 200 pieces take 20 days. Each piece packs into a carton measuring 28 x 24 x 18 cm with a gross weight of 0.5 kg. Carton size and weight figures apply to one packed piece.
Quotation Requests with Your Spacing List
Send a spacing list and quantity for an official quotation on model BRS-BAR-BRS-003. State the chosen centre-to-centre figure plus knob diameter for every front in the schedule. List overall bar lengths as well, since each pairing fixes the drill positions. Include the required quantity for each size in the enquiry. Trade sales staff reply with commercial terms and production timing for the batch.
Products are manufactured in Guangdong, China. The selling unit is one piece.
